Acrylic adhesive for label
General acrylic adhesive
The adhesive used on the protective film is typically a pressure-sensitive adhesive (PSA). This type of adhesive is designed to create a strong bond when pressure is applied, without the need for additional heat or solvent activation. It is commonly used in applications such as temporary surface protection, packaging, and labeling.
The adhesive on the protective film is formulated to provide good adhesion to a variety of surfaces, including plastics, glass, metal, and painted surfaces. It is designed to securely hold the protective film in place, preventing it from peeling off or shifting during handling or transportation.
The adhesive on the protective film is usually removable, allowing for easy and clean removal of the film without leaving residue or damaging the underlying surface. This is achieved by formulating the adhesive with low tack or using a removable adhesive technology.
The adhesive on the protective film may also have additional properties such as UV resistance, moisture resistance, or high temperature resistance, depending on the specific requirements of the application.
Overall, the adhesive used on the protective film is carefully selected and formulated to provide strong adhesion, easy removal, and protection for the underlying surface during transportation, handling, or storage.
Product introduction:
Two-component acrylic adhesive;
High molecular, high light transmittance;
Can adjust the viscosity range;
Good high temperature resistance.
Technical parameters:
| Product
code |
Solid content
% |
Viscosity
cp/25℃ |
Adhesion
gf/25mm |
Creep
mm |
Ball tack
1-32 |
| TY-2010 | 29-31 | 1000-3000 | 150-350 | 0.0-0.2 | 15-22 |
| TY-2020H | 29-31 | 1000-3000 | 10-120 | 0.0-0.2 | ＜7 |
| TY-2030H | 29-31 | 1500-3500 | 6-24 | 0.0-0.2 | 4-8 |
| TY-2031H | 29-31 | 1000-3000 | 1-3 | 0.0-0.5 | 3-5 |
| TY-2310 | 29-31 | 2000-5000 | 20-100 | 0.0-0.5 | 4-12 |
| TY-2320 | 29-31 | 1500-3500 | 50-300 | 0.0-0.3 | 6-12 |
